Shaw Machinery Web Site

New & Used Machinery

Home | Contact Us | How To Order

The Bulldozer Horizontal Benders 20 - 25 Ton (New)

Pipe and Rectangular Hollow Section Bending Jig This jig enables 90 degree bends to be obtained cold and unloaded in one operation up to 75mm n.b. Standard pipe formers can be supplied in aluminium or cast iron, which have a heavy section to prevent spreading and undue deformation of pipes.
Tube Bending Attachment This accessory is suitable for bending all grades of furniture tube giving a non shrink bend in round and square up to 180 degree radius.
Flat and Round Bending Die A Flat and Round bending die with a capacity which is only limited by the width of the jaw on the die. The post is of wear resistant carbon steel supported midsection and bottom but is easily withdrawn for alternative accessories. Combination Bearing Press and Broaching Jig for the cutting of key ways. A versatile tool which is simply held on with two bolts.

Technical Data

20 Tonne
Net Weight - 181 Kg dry weight less tooling
Motor - 5.5 h.p, 3 phase, 1420 r.p.m. 440 volt
Pump - Caltech gear pump, 6 litres per minute
Control Valve - Caltech with built in valve
Ram - 20 tonne, Stroke 280mm, 75mm shaft
Oil Pressure - Fixed at 1600 lb/sq in
Oil - Capacity dry 10 litres, Castrol Hyspin 68

25 Tonne
Net Weight - 192 Kg dry weight less tooling
Motor - 5.5 h.p, 3 phase, 1420 r.p.m. 440 volt
Pump - Caltech gear pump, 6 litres per minute
Control Valve - Caltech with built in valve, Variable pressure 0 - 2000 lb/sq in
Ram - 25 tonne, pressure 0 - 2000 lb/sq in
Sight Guage - 0 - 2500 lb/sq in
Oil - Capacity dry 10 litres, Castrol Hyspin 68

Bending Capacity - Standard Dies

Material - Flat Steel, Round Bar	The Bending size of material is governed by the width of the dies
Size	Die A - 80mm x 10mm Die B - 130mm x 12mm
Pipe	Jig No. 1 Pipe to 50mm I.D. 12mm, 20mm, 25mm, 32mm, 38mm and 50mm Jig No. 2 65mm and 75mm
Rectangular Hollow	Jig No. 1
Section	38mm and 25mm sq
Tube Round	10mm, 12mm, 16mm, 20mm, 22mm and 25mm
Bending Square	12mm, 16mm, 19mm, 22mm and 25mm
Special Uses	Broaching, Bearing Press, Wire Swagging, Press Work, Riveting, Straightening, Punching etc.

Call for the latest price

sales@shawmachinery.com.au
or
Phone: 07 3883 2731
or
Fax: 07 3883 2732

All prices and specifications are subject to change without notice
Prices are subject to sales tax or GST if applicable