Home | Contact
Us | How To Order
Back
8ft x 3mm Hydraulic Panbrake
With Angle programmable Controller
SPECIFICATIONS
- 3mm x 2450mm (8ft)
- Hydraulic Clamp and unclamp from foot switch.
- Final Clamping is limited to 10mm increments for safety
- Fingers are high carbon steel, Apron blade high carbon tensile steel 20mm and segmented both are hardened and ground for repeat accuracy.
- 24 Volt to foot switch. Overload protected
- Clamping provided by 2 rams, oil delivered through steel pipes. Hydraulic clamping of top beam with 13 individual segmented finger clamps.
- Unclamp is controlled, to allow the operator to regulate the open height.
- Apron bed is segmented 11 individual adjustable segments for return fold down of 50mm suitable for splash backs & TDF etc.
- Automatic and manual control. In auto cycle after clamping start auto apron will come up to angle programmed, apron will return and the head will unclamp by foot pedal control
- Safety trap bar on apron
- Motor 5.5Kw
- Length – 3.5 metres
- Width – 1 metre
- Height – 1.5 metres
- Weight – 3ton
|
Structural & Operating Features
-
Hydraulically operated bending and clamping beam for efficient heavy duty operation
-
High structural rigidity from heavy plate steel box construction with continuous welded seams
-
Bending beam powered by dual hydraulic cylinders.
-
Fully integrated and enclosed electric/hydraulic system with large oil reservoir to maintain low oil temperature.
-
Powerful hydraulic pump provides rapid operation with timer for bend angle
-
High load capacity dual spherical plane bearings utilized at bending beam pivots and over-center clamp bearings
-
Precise electric/hydraulic controls with manual inching of bending beam
-
Comprehensive equipment protection from electric and hydraulic overload systems
|
Price Call
sales@shawmachinery.com.au
or
Phone: 07 3883 2731
or
Fax: 07 3883 2732
All prices and specifications are subject to change without notice
Prices are subject to sales tax or GST if applicable
Copyright © 2000 - MG Seatek Industries Australia
Web master: michael@mgseatek.com