Shaw Machinery Web Site

New & Used Machinery

80XS Hydraulic Punch & Shear Machine with Notching

INTRODUCTION
These universal machines are supplied with standard tooling including repetition support tables at Punch, Shear and Notch stations and with easily adjusted hold-downs at all five work stations to safely control the operations - comprehensive safety guards are fitted as standard on all Work Stations. Free standing on suitable floor, they just require electrical connection to be ready for work.
For two operator utilisation the Hydraulic system is activated buy two shielded foot controls, one operating the punch end cylinder; the other operating the power to the three shearing and the notch stations.
This system gives accurate power inching at all five work stations and allows the machine to be stopped at any position giving safe and accurate tool setting and work positioning. Limit switches at both ends of the machine control stroke length at all stations. Centralised lubrication is by metered one shot system - being one feature of the low maintenance requirement.

FEATURES
· Large punch table with multipurpose bolster - removable table block for overhang channel/joist flange punching.
· Punch table, shear table and notch table standard equipment.
· Power inching and adjustable strokes at punch and shear end.
· Centralised pressure lubrication.
· Wide applications - for large hole punching, tube notching, bending.
· Punching - large throat depth
· Low voltage movable light standard equipment.
· Mitre cut flanges of angle under shear blade.
· Alternative rectangular/vee notching facility.
· Work Station guards standard fitment.
· Two cylinder operation.
· Overload relief on hydraulic system.
· Interchangeable bearings, seals and valves readily available from stockists of hydraulic equipment.
· Machines with low maintenance requirement.
· German Siemens Electrical

SPECIFICATIONS
Punching
Rated capacity 80 Ton
Maximum capacities 30 x 20mm
Diameter x thickness 38 x 15 - 50 x 12mm - 30 x 20mm
Maximum stroke length 80mm
Speed - 20mm travel 34 full cycles
Throat depth standard 355mm
Working height 1050mm

Shearing
Flat bar 330 x 20mm
Alternative 480 x 10mm
Blade length 485mm
Angle flange trim 120 x 15mm
Working height 890mm

Angle Cutting
At 90° with non deforming multi edged blades 160 x 16mm
At 45° mitre 80 x 10mm
Working height 1155mm

Section Cutting
Round/square bar 50mm
Channel beam 160 x 90mm
Tee 100 x 12mm

Notching
Material Thickness 13mm
Width 52mm
Depth: vee-rect 52 x 100mm
Angle flange 100 x 13mm
Working height 890mm

Specification
Motor 7.5kw
Net weight 2430kg
Gross weight 2620kg
Machine dimensions 183 x 79 x 192cm
Packed dimensions 195 x 92 x 210cm

Optional Tooling
Bending Vee die and 4 way die block 540mm long
Tube Notch maximum diameter 108mm
Louvre Die punch unit 115 x 80mm

Call for latest price

sales@shawmachinery.com.au
or
Phone: 07 3883 2731
or
Fax: 07 3883 2732

All prices and specifications are subject to change without notice
Prices are subject to sales tax or GST if applicable